2022

Neuer Wert

Alloy wheel Legacy Forged B 7.5 x16 ET 0 5-139.7 for Suzuki Jimny GJ/HJ 2018 - present

8x16 ET 0 5-139.7 Suzuki

SKU:: Legacy Forged B

796,11 € *

Available immediately

Delivery time: 11 - 12 Workdays

Tow bar SUZUKI JIMNY from 2018 to present, Westfalia tow bracket incl. ECS wiring kit 13-pin vehicle-specific

Tow bar with 2-hole flange ball Trailer load: 1500 kg Tongue load: 90 kg Hole dimension: 83 x 56 mm Weight: 25.9 kg Installation time: approx. 2 hours After the complete kit is installed, the vehicle does not need to be presented to an inspector. The registration entry in the vehicle documents of your SUZUKI JIMNY is also not required.

SKU:: RAM175034

856,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

ARB battery holder for Slimline Battery, Ford Ranger from `22

ARB battery holder for Slimline Battery, Ford Ranger from 2022: ARB component for the Slimline Battery System for Ford Ranger, for a compact second-battery installation in the vehicle.

SKU:: 35-SLB40010
Item weight:: 1,50 kg

425,45 € *

Low stock level

Delivery time: 2 - 3 Workdays

In stock

ARB battery holder for Slimline Battery, Toyota LC J79 from `07, double cab

ARB battery holder for Slimline Battery, Toyota LC J79 from `07, double cab by ARB, fits Toyota Land Cruiser J7. Provides practical added value in everyday use and on trips.

SKU:: 35-SLB12010
Item weight:: 8,30 kg

438,24 € *

Low stock level

Delivery time: 2 - 3 Workdays

Out of stock

ARB battery holder for Slimline Battery, Toyota LC J79 from `07, single cab

ARB battery holder for Slimline Battery, Toyota LC J79 from `07, single cab by ARB, fits Toyota Land Cruiser J7. Provides practical added value in everyday use and on trips.

SKU:: 35-SLB12020
Item weight:: 1,50 kg

438,24 € *

Currently out of stock

Go to item

In stock

ARB differential lock Ford Transit from 04/18, rear axle, 35 spline, 12 bolts

ARB differential lock Ford Transit from 04/18, rear axle, 35 ratio, 12 bolts from ARB Air Locker, fits Ford Transit panel van. Provides 100 % traction at the push of a button when a wheel loses grip.

SKU:: 2-270-1
Item weight:: 17,50 kg

1.540,54 € *

Low stock level

Delivery time: 2 - 3 Workdays

Out of stock

ARB Polymer Skidplate for Toyota Hilux from 09/2015 10mm, OEM bumper

ARB Polymer Skidplate for Toyota Hilux from 09/2015 10mm, OEM bumper: ARB Polymer Skidplate for Toyota Hilux to protect the engine, transmission and attached components during off-road driving. Vehicle-specific fit at the designated mounting points.

SKU:: 5-UP008BL007
Item weight:: 22,00 kg

1.147,18 € *

Currently out of stock

Go to item

Out of stock

ARB Polymer Skidplate for Toyota Hilux from 09/2015 10mm, Stealth Bar

ARB Polymer Skidplate for Toyota Hilux from 09/2015 10mm, Stealth Bar: ARB Polymer Skidplate for Toyota Hilux to protect the engine, transmission and attached components during off-road driving. Vehicle-specific fit at the designated mounting points.

SKU:: 5-UP007BL007
Item weight:: 22,00 kg

1.147,18 € *

Currently out of stock

Go to item

Out of stock

ARB Summit Protection Step Toyota 78 Series `07-`23, 60.3mm, matte black

ARB Summit Protection Step Toyota 78 Series 2007-2023, 60.3mm, matte black: vehicle-specific ARB side step or side protection for Toyota Land Cruiser 70 for safe entry and protection of the vehicle flank.

SKU:: 2-4412740
Item weight:: 27,00 kg

1.304,88 € *

Currently out of stock

Go to item

Out of stock

ARB Summit Sahara for Toyota Landcruiser 300 from 07/21

ARB Summit Sahara for Toyota Landcruiser 300 from 07/21: rugged ARB front bumper or bull bar for Toyota Land Cruiser 300, designed for off-road use and for mounting a winch and auxiliary lights.

SKU:: 2-3925010
Item weight:: 75,00 kg

4.954,85 € *

Currently out of stock

Go to item

Out of stock

ARB Summit Sahara Toyota Hilux from 21, not Invincible models

ARB Summit Sahara Toyota Hilux from 21, not Invincible models: rugged ARB front bumper or bull bar for Toyota Hilux, designed for off-road use and to accept a winch and auxiliary lights.

SKU:: 2-3914670
Item weight:: 75,00 kg

2.919,84 € *

Currently out of stock

Go to item

Out of stock

ARB Sahara Bar for Ford Ranger PXIII '18-'22

ARB Saharabar for Ford Ranger PXIII 2018-2022: a rugged ARB front bumper or bull bar for the Ford Ranger, designed for off-road use and for mounting a winch and auxiliary lights.

SKU:: 2-3940540
Item weight:: 75,00 kg

3.128,46 € *

Currently out of stock

Go to item

Out of stock

ARB side rails & steps Toyota LC 76 from `12

ARB Side Rails & Steps Toyota LC 76 from 2012: vehicle-specific ARB step or side protection for Toyota Land Cruiser 70 for safe entry and protection of the vehicle flank.

SKU:: 2-4412470
Item weight:: 50,00 kg

1.435,69 € *

Currently out of stock

Go to item

Out of stock

ARB Stealthbar Toyota Land Cruiser `07 - `23, wide body

ARB Stealthbar Toyota Land Cruiser `07 - `23, wide body by ARB, fits Toyota Land Cruiser J7. Provides practical added value off-road and when traveling.

SKU:: 2-SA289BL259
Item weight:: 45,00 kg

2.193,77 € *

Currently out of stock

Go to item

Out of stock

ARB Stealthbar Toyota Land Cruiser `07 - `23, narrow body

ARB Stealthbar Toyota Land Cruiser `07 - `23, narrow body by ARB, fits Toyota Land Cruiser J7. Provides practical added value off-road and when traveling.

SKU:: 2-SA288BL259
Item weight:: 45,00 kg

2.092,91 € *

Currently out of stock

Go to item

In stock

Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9in (2007 - Present) Triple Crossbar Kit

The Front Runner crossbar kit offers a quick and easy way to transport your gear on the bed of your Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9'' (2007 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.

SKU:: KRCS008
Item weight:: 10,00 kg

635,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9in (2007 - present) Slimline II Bed Rack Kit

This 1762 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9'' (2007 - present) includes the Slimline II platform and 3 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.

SKU:: KRCS006T
Item weight:: 37,00 kg

1.615,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6in (1988 - present) Slimline II Bed Rack Kit

This 2368 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6'' (1988 - present) includes the Slimline II platform and 4 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.

SKU:: KRCS007T
Item weight:: 41,00 kg

1.829,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6in (1998- Present) Triple Crossbar Kit

The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6'' (1998 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.

SKU:: KRCS009
Item weight:: 10,00 kg

635,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 6'9in (2020 - Present) Triple Crossbar Kit

The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 6'9'' (2020 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.

SKU:: KRCS010
Item weight:: 10,00 kg

635,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 6'9in (2020 - Present) Slimline II Bed Rack Kit

This 1964 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 6'9'' (2020 - present) includes the Slimline II platform and 4 universal bed mounting feet (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.

SKU:: KRCS008T
Item weight:: 41,00 kg

1.829,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 8in (2007 - Present) Slimline II Bed Rack Kit

This 2368 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 8'' (2007 - present) includes the Slimline II platform and 4 universal bed mounting feet (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.

SKU:: KRCS009T
Item weight:: 46,00 kg

2.055,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado 3. / 4. Gen. (2013 - present) Truck Camper Slimline II roof rack kit

This 752 mm (L) x 1425 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector as well as 1 leg rail(s) (pair), with which you can mount the platform on your Chevrolet Silverado 3. / 4. Gen. (2013 - present) you can mount.Drilling is required for installation.

SKU:: KRCS016T

809,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado Crew Cab (2007 - Present) / Short Bed / Double Bed Rack Kit

Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.

SKU:: KRCS004
Item weight:: 11,00 kg

479,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado Crew Cab (2007 - Present) / Short Bed Slimline II Bed Rack Kit

This bed rack kit was specially developed for your Chevrolet Silverado / short bed so that you can transport your gear without giving up valuable cargo space in the bed.

SKU:: KRCS004T
Item weight:: 35,80 kg

1.489,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado Crew Cab (2007 - Present) Double Crossbar Kit

Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.

SKU:: KRCS005
Item weight:: 12,00 kg

565,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado Crew Cab (2007 - Present) Slimline II Bed Rack Kit

This bed rack kit was specially developed for your Chevrolet Silverado so that you can transport your gear without giving up valuable cargo space in the bed.

SKU:: KRCS005T
Item weight:: 35,80 kg

1.719,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado Crew Cab (2007 - Present) Triple Bed Rack Kit

Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.

SKU:: KRCS007
Item weight:: 16,60 kg

739,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado Crew Cab / Short Bed (2007 - Present) Triple Bed Rack Kit

Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.

SKU:: KRCS006
Item weight:: 14,40 kg

655,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

In stock

Chevrolet Silverado Standard Pickup (1987- Present) Slimline II Bed Rack Kit

This 1358 mm (L) x 1475 mm (W) Slimline II bed rack kit offers a complete platform over the bed of your Chevrolet Silverado Standard Pickup (1987- Present) The kit includes the Slimline II platform 4 bed rack mounting feet as well as two mounting rails.Note: Additional drilling may be required for installing the bed rack kit.

SKU:: KRCS001T
Item weight:: 31,60 kg

1.255,00 € *

Available immediately

Delivery time: 2 - 3 Workdays

Items 1 - 30 of 2813