2012
Neuer Wert
Items 1 - 100 of 127
Best sellers
ARB Seat Organiser from ARB Touring, fits Ineos Grenadier, Isuzu D-MAX 2012 - 2019(type ATF), Jeep Wrangler, Land Rover Defender up to 2016 and others.. Provides practical added value in everyday use and on trips.
In stock
Protect your headlights with this resistant protective grille set.
In stock
Skidplate for engine
Material: Steel 3 mm (pressed)
Vehicle: Dodge RAM 1500
Type:
Engines: 5.7
Model years: 2010 - 2020
Your vehicle data differs or you are unsure whether this is the right choice?
Just give us a call: +49 (0)6154 6321-0
Manufacturer: SGS 4x4 GmbH
Google rating: 
We stock over 2,000 Skidplates for you in our warehouse in 64372 Ober-Ramstadt, Germany.
In stock
ARB compressor 12 volt, CKMA12 from ARB Air Locker, fits Volkswagen, Fiat Fullback, Ford Transit panel van, Isuzu D-MAX 2012 - 2019 (type ATF), and more. Provides on-board compressed air for Air Lockers, tire inflation and air suspension.
In stock
The Front Runner crossbar kit offers a quick and easy way to transport your gear on the roof of your vehicle. Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 2 mounting feet (pairs), 1 crossbar / 1425 mm (pair), one crossbar wind deflector / 10 mm, installation instructions and the components required to mount the crossbars on your vehicle.
In stock
This off-road capable ladder is the easiest way to load and reach the equipment on the roof rack of your Land Rover Defender 90 / 110.
In stock
Rhino Rack Sportz crossbars 1260 mm, set of 2, including RX100 leg kit for vehicles with raised roof rails, for example Ford Ranger Wildtrak, VW Amarok, Toyota Land Cruiser or Subaru Forester.
In stock
This off-road capable ladder is the best way to get easy access to the equipment on your Front Runner roof rack. This six-step, black powder-coated ladder is universally usable and mounts directly to the body or the rear doors of medium to larger vans and SUVs.
In stock
Skidplate for transmission & transfer case
Material: Steel 3 mm
Vehicle: Dodge RAM 1500
Type:
Engines: 5.7
Model years: 2010 - 2020
Your vehicle data differs or you are unsure whether this is the right choice?
Just give us a call: +49 (0)6154 6321-0
Manufacturer: SGS 4x4 GmbH
Google rating:
We stock over 2,000 Skidplates for you in our warehouse in 64372 Ober-Ramstadt, Germany.
In stock
ARB Brushless Compressor Single, 12 volt, for permanent installation, CKBLA12 by ARB Air Locker, fits Volkswagen, Fiat Fullback, Ford Transit panel van, Isuzu D-MAX 2012 - 2019 (type ATF) and others.. Provides on-board compressed air for Air Lockers, tire inflation and air suspension.
In stock
Protect your taillights from damage with these robust, plastic-coated taillight protectors.
In stock
The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Ram 1500 / 2500 / 3500 ReTrax XR 5'7'' (2009 - present). Ideal if you are looking for a solution smaller than a full roof rack. This flat, easy to install and remove solution includes 1 crossbar / 1575 mm (pair) and 2 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.
Wheel spacer for Dodge RAM 1500 made of aluminum | Front & rear axle 68 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with M 14 x 1.5
Skidplate for transmission & transfer case
Material: Steel 2.5 mm
Vehicle: Land Rover Defender 90 / 110
Type: LD
Engines: all
Model years: 2004 -
Your vehicle data differs or you are unsure whether this is the right choice?
Just give us a call: +49 (0)6154 6321-0
Manufacturer: SGS 4x4 GmbH
Google rating:
We stock over 2,000 Skidplates for you in our warehouse in 64372 Ober-Ramstadt, Germany.
Skidplate for engine
Material: Steel 2.5 mm
Vehicle: Range Rover Sport
Type: LS
Engines: 3.0TDI AT, 4.2, 4.4l AT
Model years: 2005 - 2013
Your vehicle data differs or you are unsure whether this is the right choice?
Just give us a call: +49 (0)6154 6321-0
Manufacturer: SGS 4x4 GmbH
Google rating:
We stock over 2,000 Skidplates for you in our warehouse in 64372 Ober-Ramstadt, Germany.
In stock
ARB compressor compact, 12 volt CKSA12 from ARB Air Locker, fits Volkswagen, Fiat Fullback, Ford Transit panel van, Isuzu D-MAX 2012 - 2019 (type ATF), and more. Provides on-board compressed air for Air Lockers, tire inflation and air suspension.
In stock
ARB Pump Up Kit, tire inflation hose 7 m from ARB Air Locker, fits Mercedes-Benz, Volkswagen, Fiat Fullback, Isuzu D-MAX 2012 - 2019(type ATF) and others.. Provides on-board compressed air for Air Lockers, tire inflation and air suspension.
In stock
ARB Pump Up Kit, Tire Inflation Hose 7m, gray by ARB Air Locker, fits Mercedes-Benz, Volkswagen, Fiat Fullback, Isuzu D-MAX 2012 - 2019 (type ATF) and others. Provides on-board compressed air for Air Lockers, tire inflation and air suspension.
In stock
ARB Slip on Seat Cover Series III, universal seat cover, dark gray from ARB, fits Isuzu D-MAX 2012 - 2019(type ATF), Jeep Wrangler, Land Rover Defender up to 2016, Suzuki Jimny GJ/HJ and others. Provides practical added value in everyday use and on trips.
In stock
This Bed Rack Kit was specially designed for your RAM, so you can transport your gear without giving up valuable cargo space in the bed. The Slimline II Roof Rack Kit is installed on the existing factory / OEM rails.
In stock
This Slimline II Bed Rack Kit is mounted over the bed of your Dodge Ram (2009-present). The Slimline II platform ( 1255mm x 1762mm) mounts to the 6 included pickup bed feet, which engage the original mounting points of the Dodge Ram.
In stock
This 2312 mm Slimline II roof rack kit includes two Slimline II platforms, wind deflectors, a rail set and 12 mounting feet for installing the Slimline II platform on your Dodge Sprinter van (2007 - present). Additional drilling is required to install this kit.
In stock
This 1560 mm Slimline II roof rack kit includes two Slimline II platforms, wind deflectors, a rail set and 12 mounting feet for installing the Slimline II platform on your Dodge Sprinter van (2007 - present). Additional drilling is required to install this kit.
In stock
This 3120 mm Slimline II roof rack kit includes two Slimline II platforms, wind deflectors, a rail set and 12 mounting feet for installing the Slimline II platform on your Dodge Sprinter van (2007 - present). Additional drilling is required to install this kit.
Rubber mount for Koni/Trekfinder Raid shock absorber 90-5375SP1 + 90-5471 bottom, from model year 2002, fits Land Rover Defender 90/110/130 (to 2016). Provides a precise-fit addition to or lift of the suspension.
In stock
Create easily accessible storage space in your vehicle for tools, coolers, refrigerators, luggage, gear, boxes and much more. This 1.34m long cargo slide fits many pickup beds and other vehicles as a ''universal'' cargo slide. Excellent for on-road and off-road use.
Out of stock
Allows the installation of additional auxiliary switches, for e.g. Headlights.
In stock
Our famous Front Runner jerry can holder is now also available as a side mount for your Defender. Easily attaches to the side of your vehicle on the rain gutter.
In stock
This 1358 mm (L) x 1425 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 3 mounting feet (pairs), with which you can install the platform on your Land Rover Defender (1983 - 2016).This kit is taller and provides room to mount Front Runner camping tables or other compatible gear under the roof rack.The system installs easily using the off-road-capable feet. No drilling is required.
In stock
This 2772 mm (L) x 1425 mm (W) Slimline II Roof Rack Kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs), which let you mount the platform on your Land Rover Defender 110 (1983 - 2016). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 2166 mm (L) x 1425 mm (W) Slimline II 3/4 roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs), with which you can install the platform on your Land Rover Defender 110 (1983 - 2016). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 2166 mm (L) x 1425 mm (W) Slimline II 3/4 Roof Rack Kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs), which let you mount the platform on your Land Rover Defender 110 (1983 - 2016). This kit is taller and provides space to mount Front Runner camping tables or other compatible gear under the roof rack. The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 2772 mm (L) x 1425 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs) for installing the platform on your Land Rover Defender 110 (1983 - 2016). This kit is taller and provides space to mount Front Runner camping tables or other compatible gear under the roof rack. The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 1560 mm (L) x 1425 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 3 mounting feet (pairs) to mount the platform on your Land Rover Defender 110 / 130 (1983 - 2016). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 1560 mm (L) x 1425 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 3 mounting feet (pairs) to mount the platform on your Land Rover Defender 110 / 130 (1983 - 2016). This kit is taller and provides space to mount Front Runner camping tables or other compatible gear under the roof rack. The system is easy to install with the off-road-capable legs. No drilling is required.
Out of stock
Create more cargo space with the Land Rover Defender 130 (1983 - 2016) Slimline II bed rack kit by carrying your gear above your vehicle's bed. This off-road-capable kit will be by your side through countless adventures.
In stock
This 1964 mm (L) x 1425 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs) for installing the platform on your Land Rover Defender 90 (1983 - 2016). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 1964 mm (L) x 1425 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs) for installing the platform on your Land Rover Defender 90 (1983 - 2016). This kit is taller and provides space to mount Front Runner camping tables or other compatible gear under the roof rack. The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 752 mm (L) x 1425 mm (W) Slimline II Roof Rack Kit includes the Slimline II platform, a wind deflector and 2 mounting feet (pairs), which let you mount the platform on your Land Rover Defender Single Cab (1983 - 2016) pickup. The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 1560 mm (L) x 1255 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector and 1 foot rail (pair), with which you can install the platform on your Land Rover Freelander 2 (L359) (2007 - 2014).The system attaches easily to the vehicle's existing factory mounting points. Drilling is required for installation.
In stock
The Front Runner Gullwing Box is used in combination with the Front Runner Gullwing window pane or the Front Runner aluminum Gullwing window and creates practical storage space that is accessible from the side of your vehicle.
In stock
This 1560 mm (L) x 1345 mm (W) Slimline II roof rack kit includes the Slimline II platform, wind deflector, 2 rails and 3 pairs of mounting feet, with which you can install the Slimline II platform on your Land Rover Range Rover Sport L320. Drilling is required for installation.
Mounting hardware for 2 pcs Koni/Trekfinder Raid dampers 90-5375SP1 + 90-5471 bottom, from model year 2002, fits Land Rover Defender 90/110/130 (to 2016). Provides a precise-fit addition to or lift of the suspension.
In stock
Fog light kit for ARB bumpers (round), new design (H3) from ARB, fits Volkswagen, HUMMER H3, Land Rover Discovery II, Land Rover Discovery IV, and more. Provides more light and safety when driving at night.
In stock
axle, all Rover from `86
Out of stock
OME steering damper SD02 Rover Discovery `99 -> by Old Man Emu, fits Land Rover Discovery II. Offers noticeably better vehicle control off-road and on the road, tuned to lift and load.
In stock
Powermate III with WARN 2000 winch, for loads up to max. 500 kg, from Warn, fits Mercedes-Benz, Volkswagen, Ford Maverick 1993 - 1998, Ford Ranger 2007 - 2011, and more. Provides safe self-recovery and recovery of other vehicles.
In stock
This 1560 mm (L) x 1575 mm (W) Slimline II Bed Rack Kit for the RAM 1500 / 2500 / 3500 6' 4'' (2009 - present) includes the Slimline II platform, 1 rail (pair) that mounts in the side channel of the bed, and 3 universal bed mounting feet (pairs) that fit into the rails.
In stock
Discover more with your Rebel 1500 Crew Cab and the Slimline II Roof Rack Kit. With quick and secure mounting of more than 55 accessories, your Rebel is ready for every adventure.
In stock
This 1358 mm (L) x 1425 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector as well as 1 pairs of track rails, with which you can mount the platform on your Ram 1500 / 2500 / 3500 Crew Cab (2009 - present). Drilling is required for installation.
In stock
The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Ram 1500 / 2500 / 3500 ReTrax XR 5'7'' (2009 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.
In stock
This 1560 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Ram 1500 / 2500 / 3500 ReTrax XR 5'7'' (2009 - present) includes the Slimline II platform and 3 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
This 1762 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Ram 1500 / 2500 / 3500 ReTrax XR 6'4'' (2003 - present) includes the Slimline II platform and 3 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
Out of stock
This 1358 mm (L) x 1575 mm (W) Slimline II Bed Rack Kit for the RAM 1500 5.7' (2009 - present) includes the Slimline II platform, 1 rail (pair) that mounts in the side channel of the bed, and 3 universal bed mounting feet (pairs) that fit into the rails.
In stock
Transport your equipment safely on the bed of your Ram 1500 with these strong crossbars.
In stock
Transport your equipment safely on the bed of your Ram 1500 5.7' Crew Cab with these strong crossbars.
In stock
This Bed Rack Kit was specially designed for your RAM 1500 6.4', so you can transport your gear without giving up valuable cargo space in the bed.
In stock
Transport your equipment safely on the bed of your Ram 1500 with these strong crossbars.
In stock
This Bed Rack Kit was specially designed for your RAM 1500 6.4' Quad Cab, so you can transport your gear without giving up valuable cargo space in the bed.
In stock
This 1358 mm (L) x 1255 mm (W) Slimline II Bed Rack Kit for the RAM (2009 - present), which is equipped with an OEM bed rail and RamBox, includes the Slimline II platform as well as 3 universal bed mounting feet (pairs) that fit into the existing OEM bed rail.
In stock
Rhino Rack HD crossbars 1250 mm in black as a set for RSI: two bars, RLT600 leg kit with four legs, two spacers and eight M6 channel nuts. After initial fitting, legs and bars come off without tools.
In stock
Rhino Rack Pioneer 6 Platform 1500 x 1240 mm including RLT600 leg kit with four legs and nuts for the RSI hardtop. Complete kit for mounting on RSI hardtops of various double cab pick-ups.
Out of stock
Rhino Rack Pioneer 6 Platform 900 x 1430 mm for the Land Rover Defender 90, 2010–2020, including RL leg kit. The kit includes two RL210DS8 leg kits for the rain gutter and the VA-FK1 adapter kits.
In stock
Rhino Rack Sportz crossbars 1260 mm, set of 2, for RSI hardtop. Kit including RX300 leg kit and four channel nuts.
In stock
Rhino Rack Sportz crossbars 1260 mm, set of 2, for RSI hardtop. Kit including RLT600 Quick Mount leg kit with four legs and eight M6 channel nuts.
In stock
Rhino Rack Sportz crossbars 1500 mm (set of 2) for Land Rover Range Rover Sport (LW) from 2013. Complete kit with RLKVA 2500 legs and DK408 fitting kit for clamp mounting with no drilling.
In stock
Rhino Rack Sportz crossbars 1500 mm (set of 2) for RAM 1500 from 2011, Quad Cab and Crew Cab. Complete kit with RLKVA 2500 legs and DK043 fitting kit for clamp mounting with no drilling.
In stock
Rhino Rack Sportz crossbars 1500 mm (set of 4) for the Land Rover Defender 110 1993–2020 with rain gutter. Kit including RL210DS8 leg kits and VA-FK1 fit kits.
Out of stock
Rhino Rack StealthBars set JA7971 in black: 2 crossbars (905 mm) & fitting kit RSK01 for vehicles with raised roof rails. The bars sit just 35 mm above the rails and are lockable.
In stock
bed `10 to `18 , DC EVO 6-EV1000-MB
In stock
RSI table, stowable, from RSI - Rock Solid Industries, fits Volkswagen, Dodge RAM 1500, Ford Ranger from 2023, Toyota Land Cruiser J7 and others.. Provides a secure, weatherproof and lockable cargo area.
In stock
SNO-WAY snow plow series 22-2, 183x55cm with level compensation & E.S.S system by Sno-Way, fits Mercedes-Benz, Volkswagen, Fiat Ducato, Fiat Fullback and others.. Allows use as a winter service vehicle.
Wheel spacers for Dodge Challenger made of aluminum | Front & rear axle 46 mm per axle | Model year: from 2008
Wheel spacers for Dodge Challenger made of steel | Front & rear axle 46 mm per axle | Model year: from 2008
Wheel spacers for Dodge Challenger made of aluminum | Front & rear axle 60 mm per axle | Model year: from 2008
Wheel spacers for Dodge Challenger made of steel | Front & rear axle 60 mm per axle | Model year: from 2008
Wheel spacers for Dodge Charger made of aluminum | Front & rear axle 46 mm per axle | Model year: from 2006
Wheel spacers for Dodge Charger made of steel | Front & rear axle 46 mm per axle | Model year: from 2006
Wheel spacers for Dodge Charger made of aluminum | Front & rear axle 60 mm per axle | Model year: from 2006
Wheel spacers for Dodge Charger made of steel | Front & rear axle 60 mm per axle | Model year: from 2006
Wheel spacer for Dodge Charger made of aluminum | front axle 46mm & rear axle 60 mm per axle | Model year: from 2006
Wheel spacers for Dodge Dakota made of aluminum | Front & rear axle 48 mm per axle | Model year: from 2005 (5-bolt)
Wheel spacers for Dodge Dakota made of steel | Front & rear axle 48 mm per axle | Model year: from 2005 (5-bolt)
Wheel spacers for Dodge Dakota made of aluminum | Front & rear axle 68 mm per axle | Model year: from 2005 (5-bolt)
Wheel spacers for Dodge Dakota made of steel | Front & rear axle 68 mm per axle | Model year: from 2005 (5-bolt)
Wheel spacers for Dodge Durango made of aluminum | Front & rear axle 46 mm per axle | Model year: from 2010
Wheel spacers for Dodge Durango made of steel | Front & rear axle 46 mm per axle | Model year: from 2010
Wheel spacers for Dodge Durango made of aluminum | Front & rear axle 60 mm per axle | Model year: from 2010
Wheel spacers for Dodge Durango made of steel | Front & rear axle 60 mm per axle | Model year: from 2010
Wheel spacer for Dodge RAM 1500 made of aluminum | Front & rear axle 48 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with 1/2" or 9/16"
Wheel spacer for Dodge RAM 1500 made of aluminum | Front & rear axle 48 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with M 14 x 1.5
Wheel spacer for Dodge RAM 1500 made of steel | Front & rear axle 48 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with 1/2" or 9/16"
Wheel spacer for Dodge RAM 1500 made of steel | Front & rear axle 48 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with M 14 x 1.5
Wheel spacer for Dodge RAM 1500 made of aluminum | Front & rear axle 68 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with 1/2" or 9/16"
Wheel spacer for Dodge RAM 1500 made of steel | Front & rear axle 68 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with 1/2" or 9/16"
Wheel spacer for Dodge RAM 1500 made of steel | Front & rear axle 68 mm per axle | Model year: 2012 - 2018 (5-hole) | Type: version with M 14 x 1.5
Wheel spacers for Land Rover Freelander II made of aluminum | Front & rear axle 46 mm per axle | Model year: from 2007
Wheel spacers for Land Rover Freelander II made of steel | Front & rear axle 46 mm per axle | Model year: from 2007
Wheel spacers for Land Rover Freelander II made of aluminum | Front & rear axle 50 mm per axle | Model year: from 2007
Wheel spacers for Land Rover Freelander II made of steel | Front & rear axle 50 mm per axle | Model year: from 2007
Items 1 - 100 of 127