2023
Neuer Wert
Items 1 - 90 of 2612
8x16 ET 0 5-139.7 Suzuki
Tow bar with 2-hole flange ball
Trailer load: 1500 kg
Tongue load: 90 kg
Hole dimension: 83 x 56 mm
Weight: 25.9 kg
Installation time: approx. 2 hours
After the complete kit is installed, the vehicle does not need to be presented to an inspector. The registration entry in the vehicle documents of your SUZUKI JIMNY is also not required.
In stock
ARB battery holder for Slimline Battery, Ford Ranger from 2022: ARB component for the Slimline Battery System for Ford Ranger, for a compact second-battery installation in the vehicle.
In stock
ARB battery holder for Slimline Battery, Toyota LC J79 from `07, double cab by ARB, fits Toyota Land Cruiser J7. Provides practical added value in everyday use and on trips.
In stock
ARB Canbus adapter cable for VW Amarok & Ford Ranger from 2023: ARB adapter cable for Ford Ranger, VW Amarok for vehicle-specific integration into the vehicle's electrical system.
In stock
ARB differential lock Ford Transit from 04/18, rear axle, 35 ratio, 12 bolts from ARB Air Locker, fits Ford Transit panel van. Provides 100 % traction at the push of a button when a wheel loses grip.
In stock
The Front Runner crossbar kit offers a quick and easy way to transport your gear on the bed of your Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9'' (2007 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.
In stock
This 1762 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9'' (2007 - present) includes the Slimline II platform and 3 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
This 2368 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6'' (1988 - present) includes the Slimline II platform and 4 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6'' (1998 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.
In stock
The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 6'9'' (2020 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.
In stock
This 1964 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 6'9'' (2020 - present) includes the Slimline II platform and 4 universal bed mounting feet (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 8in (2007 - Present) Slimline II Bed Rack Kit
This 2368 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 8'' (2007 - present) includes the Slimline II platform and 4 universal bed mounting feet (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
This 752 mm (L) x 1425 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector as well as 1 leg rail(s) (pair), with which you can mount the platform on your Chevrolet Silverado 3. / 4. Gen. (2013 - present) you can mount.Drilling is required for installation.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
This bed rack kit was specially developed for your Chevrolet Silverado / short bed so that you can transport your gear without giving up valuable cargo space in the bed.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
This bed rack kit was specially developed for your Chevrolet Silverado so that you can transport your gear without giving up valuable cargo space in the bed.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
This 1358 mm (L) x 1475 mm (W) Slimline II bed rack kit offers a complete platform over the bed of your Chevrolet Silverado Standard Pickup (1987- Present) The kit includes the Slimline II platform 4 bed rack mounting feet as well as two mounting rails.Note: Additional drilling may be required for installing the bed rack kit.
In stock
This 1560 mm (L) x 1165 mm (W) Slimline II roof rack kit includes the platform, a wind deflector as well as a vehicle-specific foot rail to mount the platform to your Chevrolet Trailblazer (2012 - Present).
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
DECKED VX drawers for GM Silverado & Sierra 1500 2019 5'9" bed, new body style: weatherproof DECKED VX drawer system for GM Silverado 1500, GMC Sierra 1500 for the cargo bed. Two full-length, lockable drawers create protected and organized storage, the load-bearing
In stock
This Bed Rack Kit was specially designed for your RAM, so you can transport your gear without giving up valuable cargo space in the bed. The Slimline II Roof Rack Kit is installed on the existing factory / OEM rails.
In stock
This 2312 mm Slimline II roof rack kit includes two Slimline II platforms, wind deflectors, a rail set and 12 mounting feet for installing the Slimline II platform on your Dodge Sprinter van (2007 - present). Additional drilling is required to install this kit.
EVO Corse DakarZero 8.5x18", ET 30, bolt pattern 6x139.7, center bore 93.1 - matte black
In stock
This 1964 mm (L) x 1255 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector as well as 1 leg rail(s) (pair), with which you can mount the platform on your Ford Everest (2022 - present). The system attaches easily to the vehicle's existing factory mounting points. No drilling is required. Did you know that this Slimline II Roof Rack Kit for the Ford Everest U704 is approved by Ford?
In stock
This 1560 mm (L) x 1475 mm (W) Slimline II Bed Rack Kit for Ford F150 6.5' (2015 - present) beds equipped with a roll cover includes the Slimline II platform as well as 3 universal bed mounting feet (pairs) that fit into the existing roll cover rails.
Bull bar for VOLKSWAGEN Amarok 2023 -
Material: Stainless steel
Color: silver/polished
Vehicle: VOLKSWAGEN Amarok
Model years: 2023 -
Please note: no special features
Your vehicle data differs or you are unsure whether this is the right choice?
Just give us a call: +49 (0)6154 6321-0
Bull bar for VOLKSWAGEN Amarok 2023 -
Material: Stainless steel
Color: silver/polished
Vehicle: VOLKSWAGEN Amarok
Model years: 2023 -
Please note: no special features
Your vehicle data differs or you are unsure whether this is the right choice?
Just give us a call: +49 (0)6154 6321-0
235/55 R 17 103H XL Grabber AT3
Rubber mount for Koni/Trekfinder Raid shock absorber 90-5375SP1 + 90-5471 bottom, from model year 2002, fits Land Rover Defender 90/110/130 (to 2016). Provides a precise-fit addition to or lift of the suspension.
In stock
Carry your equipment on your GWM P Series with this slim and rugged Slimline II Roof Rack Kit.
In stock
This 1964 mm (L) x 1345 mm (W) Slimline II Roof Rack Kit includes the Slimline II tray, a wind deflector and 1 foot rail (pair), with which you can mount the tray on your GWM Tank 300 (2023 - Present). Over 55 accessories are available for the kit, including the handy under-rack table.
Rear axle lift spring set Trekfinder for Land Rover Defender II 90/110 with spring marking 1-SS125HA
Trekfinder lift spring set rear axle for Land Rover Defender II 90/110 with spring code 1-SS125HA, fits Land Rover Defender from 2020 (L663). Provides a precise-fit addition to or lift of the suspension. With TÜV parts certificate or type approval.
Trekfinder front axle lift spring set for Land Rover Defender II 110 with spring marking 1-SS110VA, fits Land Rover Defender from 2020 (L663). Provides a precise-fit addition to or lift of the suspension. With TÜV parts certificate or type approval.
Trekfinder front axle lift spring set for Land Rover Defender II 90 with spring marking 1-SS125VA, fits Land Rover Defender from 2020 (L663). Provides a precise-fit addition to or lift of the suspension. With TÜV parts certificate or type approval.
In stock
Alpha 4.3 Ton Quick
In stock
In stock
Winch set for Toyota Hilux incl. 4.3 ton pulling capacity winch 12V from model year 2016
Features:
Motor IP67 sealed by groove with sealing ring
Freewheel lever
Cross braces made of stainless steel
Reinforced cable drum
Powder-coated aluminum die-cast housing motor/transmission
Internal drum brake with 3 brake shoes
Removable control unit (so the control can be mounted in any position)
Reinforced, powder-coated contactor housing made of deep-drawn sheet metal
Scope of delivery:
Installation kit
Winch
Aluminum fairlead
Mounting bolts
Synthetic rope with hook
Snatch block with hook
Wired remote control
Wireless remote control
Operating manual
In stock
Transform your Ineos Grenadier’s rear door into a versatile outdoor kitchen or portable workspace. This sturdy table features an extendable bamboo top and a built-in bottle opener. Perfect for meal prep, serving drinks, or organizing gear on the go.
In stock
Increase the load capacity of your INEOS Grenadier with this lightweight and rugged Slimline II 3/4 Roof Rack Kit. This versatile roof rack can be individually customized for any adventure with over 55 available accessories, such as the under-rack table. With the sturdy Slimline II roof rack, transporting expedition, camping and sports gear becomes child's play.
In stock
Increase the load capacity of your INEOS Grenadier with this lightweight and rugged Slimline II Roof Rack Kit. This versatile roof rack can be perfectly customized for any adventure with over 55 available accessories, such as the under-rack table. With the durable Slimline II roof rack, transporting expedition, camping and sports gear becomes child's play.
In stock
This 1358 mm (L) x 1475 mm (W) Slimline II Bed Rack Kit for Ineos Grenadier Quartermaster (2023 - Present) fitted with a Roller Tonneau Cover includes the Slimline II tray and 3 mounting feet (pairs) that fit into the existing rails.
In stock
This 954 mm (L) x 1575 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector as well as 3 mounting feet (pairs), with which you can mount the platform on your Ineos Grenadier Quartermaster (2023 - present). This way you can go anywhere while carrying a solid load of camping or sports gear on the roof rack.
In stock
This 1560 mm (L) x 1575 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector as well as 4 mounting feet (pairs), with which you can mount the platform on your Ineos Grenadier Quartermaster (2023 - present). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
Get ready for unforgettable adventures where you can carry plenty of gear, with the rugged Ineos Grenadier Quartermaster (2023 - Present) Slimline II Bed Rack Kit. This rack is mounted directly on the bed, so you can still access it easily and use it as usual.
In stock
The Jeep Wrangler 4xe Extreme mounting system attaches to the existing mounting points on the chassis and roll cage. This low-profile, high-performance, nearly indestructible mounting solution lets you quickly remove the Freedom Panels while the roof rack is installed. The windshield can be lowered without any interference.
In stock
This 1358 mm (L) x 1475 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs) to mount the platform on your Jeep Wrangler 4xe (2021 - present). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 1358 mm (L) x 1475 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs) to mount the platform on your Jeep Wrangler 4xe (2021 - present). This kit is taller and provides space to mount Front Runner camping tables or other compatible equipment under the roof rack.The system is easy to install with the off-road-ready feet. No drilling is required.
In stock
This 954 mm (L) x 1425 mm (W) Slimline II 1/2 Roof Rack Kit includes the Slimline II platform, a wind deflector and the vehicle-specific Jeep Extreme installation system, with which you can mount the platform on your Jeep JL (2018 - present). Drilling is required for installation.This rugged, high-performance, virtually indestructible roof rack kit allows you to quickly remove the Jeep roof panels and works both with the hardtop and without a roof.
In stock
This 1762 mm (L) x 1425 mm (W) Slimline II Roof Rack Kit includes the Slimline II tray, a wind deflector and the Jeep Extreme Mounting System, with which you can mount the tray to your Jeep Wrangler JL 2-Door (2018 - Present).Installation requires drilling.
In stock
This 954 mm (L) x 1475 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 3 mounting feet (pairs) to mount the platform on your Jeep Wrangler JL 2-door (2018 - present). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 954 mm (L) x 1475 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 3 mounting feet (pairs) to mount the platform on your Jeep Wrangler JL 2-door (2018 - present).This kit is taller and provides space to mount Front Runner camping tables or other compatible equipment under the roof rack.The system is easy to install with the off-road-ready feet. No drilling is required.
In stock
Take your adventure gear, toys, and cargo to places only your Jeep Wrangler JL can access, with ample space for more gear and passengers, thanks to the Jeep Wrangler JL 2Door Mojave/392/2.2L Diesel Extreme Slimline II Roof Rack Kit. Start building your next adventure today.
In stock
This 1358 mm (L) x 1425 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and the Jeep Extreme mounting system, which let you mount the platform on your Jeep Wrangler JL 4-door (2018 - present). Drilling is required for installation.
In stock
The JL Extreme mounting system attaches to the existing mounting points on the chassis and roll cage. This low-profile, high-performance, nearly indestructible mounting solution lets you quickly remove the Freedom Panels while the roof rack is installed. The windshield can be lowered without any interference. The cargo weight is evenly distributed across the roll bars and the body of the Jeep, so the hardtop itself is not loaded.
In stock
This 1358 mm (L) x 1475 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs) to mount the platform on your Jeep Wrangler JL 4-door (2018 - present). The system is easy to install with the off-road-capable legs. No drilling is required.
In stock
This 1358 mm (L) x 1475 mm (W) Slimline II 1/2 roof rack kit includes the Slimline II platform, a wind deflector and 4 mounting feet (pairs) to mount the platform on your Jeep Wrangler JL 4-door (2018 - present).This kit is taller and provides space to mount Front Runner camping tables or other compatible equipment under the roof rack.The system is easy to install with the off-road-ready feet. No drilling is required.
In stock
Haul your adventure gear, toys, and cargo to places where only your Jeep Wrangler JL can go, with plenty of room for more gear and passengers thanks to the Jeep Wrangler JL 4Door Mojave Diesel Extreme Slimline II Roof Rack Kit. Start building your next adventure today.
In stock
Master every adventure with the Slimline II ¾ Roof Rack Kit for the Jeep Wrangler JLU, and turn your vehicle into a true transport wonder in no time!This robustly built rack system mounts directly to the roll cage, letting you safely transport all your gear, without giving up the comfort of still being able to remove the Freedom Panels.
In stock
This 1358 mm (L) x 1255 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector and 4 profile rails, with which you can install the platform on your Land Rover Defender 90 (2020 - present). The system mounts easily to the vehicle's existing factory rails. No drilling is required.
In stock
This 2166 mm (L) x 1255 mm (W) Slimline II Roof Rack Kit includes the Slimline II platform, a wind deflector and 1 foot rail (pair), with which you can mount the platform on your Land Rover New Defender 110 (2020 - present). The system easily installs on the existing factory OEM mounting points. The OEM rails must be removed to install the foot rail.
In stock
This 1762 mm (L) x 1255 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector and 1 foot rail (pair), which let you mount the platform on your Land Rover New Defender 90 (2020 - Present).
In stock
The Front Runner crossbar kit offers a quick and easy way to transport your gear on the roof of your vehicle. Ideal if you are looking for a solution smaller than a full roof rack. This flat, easy to (dis)assemble solution includes 2 mounting feet (pairs) and 1 load bars / 1255 mm (pair) for mounting to your vehicle's OEM rails.
In stock
This 1358 mm (L) x 1255 mm (W) Slimline II Roof Rack Kit includes the Slimline II platform incl. wind deflector as well as a vehicle-specific foot rail, with which you can mount the Slimline II platform on your Mercedes-Benz X-Class. Drilling is required for installation.
In stock
This 1345 mm x 1560 mm Slimline II roof rack kit for your Mercedes-Benz X-Class with original styling bar includes the Slimline II platform and 4 universal bed mounting feet, which let you mount the Slimline II platform on the Mercedes-Benz X-Class equipped from the factory with bed mounting rails, with no drilling or other modifications required.
In stock
This 1475 mm x 1560 Slimline II bed rack kit was designed for your Mercedes-Benz X-Class (2017 - present) with factory bed mounting rails. The kit includes the Slimline II platform as well as 4 universal bed mounting feet, which let you mount the Slimline II platform on the Mercedes-Benz X-Class equipped from the factory with bed mounting rails.
Mounting hardware for 2 pcs Koni/Trekfinder Raid dampers 90-5375SP1 + 90-5471 bottom, from model year 2002, fits Land Rover Defender 90/110/130 (to 2016). Provides a precise-fit addition to or lift of the suspension.
In stock
This 1560 mm (L) x 1255 mm (W) Slimline II roof rack kit includes the Slimline II platform,a wind deflector, 1 pairs of rails and 3 mounting feet (pair), with which you can install the platform on your Nissan NV200. Drilling is required for installation.
In stock
Ford Ranger PXIII `18 - `23, FK95
In stock
Ranger, `12 - `23
In stock
D-Max, `12->
In stock
Hilux `05 ->
Items 1 - 90 of 2612