2017
Neuer Wert
Items 1 - 100 of 1648
In stock
ARB battery holder for Slimline Battery, Toyota LC J79 from `07, double cab by ARB, fits Toyota Land Cruiser J7. Provides practical added value in everyday use and on trips.
Out of stock
ARB battery holder for Slimline Battery, Toyota LC J79 from `07, single cab by ARB, fits Toyota Land Cruiser J7. Provides practical added value in everyday use and on trips.
In stock
ARB differential lock Ford Transit from 04/18, rear axle, 35 ratio, 12 bolts from ARB Air Locker, fits Ford Transit panel van. Provides 100 % traction at the push of a button when a wheel loses grip.
Out of stock
ARB Polymer Skidplate for Toyota Hilux from 09/2015 10mm, OEM bumper: ARB Polymer Skidplate for Toyota Hilux to protect the engine, transmission and attached components during off-road driving. Vehicle-specific fit at the designated mounting points.
Out of stock
ARB Polymer Skidplate for Toyota Hilux from 09/2015 10mm, Stealth Bar: ARB Polymer Skidplate for Toyota Hilux to protect the engine, transmission and attached components during off-road driving. Vehicle-specific fit at the designated mounting points.
Out of stock
ARB Side Rails & Steps Toyota LC 76 from 2012: vehicle-specific ARB step or side protection for Toyota Land Cruiser 70 for safe entry and protection of the vehicle flank.
In stock
The Front Runner crossbar kit offers a quick and easy way to transport your gear on the bed of your Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9'' (2007 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.
In stock
This 1762 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 5'9'' (2007 - present) includes the Slimline II platform and 3 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
This 2368 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6'' (1988 - present) includes the Slimline II platform and 4 universal bed mounting legs (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Chevrolet Silverado / GMC Sierra 1500 / 2500 / 3500 ReTrax XR 6'6'' (1998 - present). Ideal if you are looking for a solution smaller than a full roof rack. This low-profile, easy to install and remove solution includes 3 crossbars / 1575 mm and 3 pickup roll cover mounting feet (pairs) that fit into the existing ReTrax XR rails.
In stock
Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 8in (2007 - Present) Slimline II Bed Rack Kit
This 2368 mm (L) x 1575 mm (W) Slimline II bed rack kit for the Chevrolet Silverado / GMC Sierra 2500 / 3500 ReTrax XR 8'' (2007 - present) includes the Slimline II platform and 4 universal bed mounting feet (pairs). The system is easy to install on the existing ReTrax XR rails using the off-road-capable feet.
In stock
This 752 mm (L) x 1425 mm (W) Slimline II roof rack kit includes the Slimline II platform, a wind deflector as well as 1 leg rail(s) (pair), with which you can mount the platform on your Chevrolet Silverado 3. / 4. Gen. (2013 - present) you can mount.Drilling is required for installation.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
This bed rack kit was specially developed for your Chevrolet Silverado / short bed so that you can transport your gear without giving up valuable cargo space in the bed.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
This bed rack kit was specially developed for your Chevrolet Silverado so that you can transport your gear without giving up valuable cargo space in the bed.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
Transport your equipment safely on the bed of your Chevrolet Silverado with these strong crossbars.
In stock
This 1358 mm (L) x 1475 mm (W) Slimline II bed rack kit offers a complete platform over the bed of your Chevrolet Silverado Standard Pickup (1987- Present) The kit includes the Slimline II platform 4 bed rack mounting feet as well as two mounting rails.Note: Additional drilling may be required for installing the bed rack kit.
In stock
This 1560 mm (L) x 1165 mm (W) Slimline II roof rack kit includes the platform, a wind deflector as well as a vehicle-specific foot rail to mount the platform to your Chevrolet Trailblazer (2012 - Present).
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
Expand your load capacity for your next adventures with this versatile, rugged roof rack kit for the Citroen Jumper van / cargo van. Whether for long trips, weekend getaways or transporting gear such as ladders and pipes, the flat roof rack is designed for heavy loads. The rails are adjustable so they can be fitted around air conditioning units, roof hatches and vents on the roof. The large load area of the roof rack was designed to carry gear and offers many options for mounting Front Runner accessories.
In stock
This Bed Rack Kit was specially designed for your RAM, so you can transport your gear without giving up valuable cargo space in the bed. The Slimline II Roof Rack Kit is installed on the existing factory / OEM rails.
In stock
This 2312 mm Slimline II roof rack kit includes two Slimline II platforms, wind deflectors, a rail set and 12 mounting feet for installing the Slimline II platform on your Dodge Sprinter van (2007 - present). Additional drilling is required to install this kit.
EVO Corse DakarZero 8.5x18", ET 30, bolt pattern 6x139.7, center bore 93.1 - matte black
Out of stock
The Front Runner crossbar kit provides a quick and easy way to transport your equipment on the bed of your Ford F150 5.5' Super Crew (2009 - present). Ideal if you are looking for a solution smaller than a full roof rack. This flat, easy to (dis)assemble solution includes 2 pickup roll cover mounting feet (pairs), 1 crossbar / 1575 mm (pair), 1 rail (pair) and installation instructions.
In stock
This 1560 mm (L) x 1475 mm (W) Slimline II Bed Rack Kit for Ford F150 6.5' (2015 - present) beds equipped with a roll cover includes the Slimline II platform as well as 3 universal bed mounting feet (pairs) that fit into the existing roll cover rails.
Out of stock
This 1358 mm (L) x 1575 mm (W) Slimline II Bed Rack Kit for the Ford F-150 Raptor 5.5' (2009 - present) includes the Slimline II platform, 1 rail (pair) and 3 universal bed mounting feet (pairs) that fit into the rails.
Out of stock
This 954 mm (L) x 1425 mm (W) Truck Camper Slimline II Roof Rack Kit includes the Slimline II platform, a wind deflector and 1 foot rail (pair) for mounting the platform on your Ford F-250 (1999 - present). No drilling is required.
Rubber mount for Koni/Trekfinder Raid shock absorber 90-5375SP1 + 90-5471 bottom, from model year 2002, fits Land Rover Defender 90/110/130 (to 2016). Provides a precise-fit addition to or lift of the suspension.
In stock
Winch set for Toyota Hilux incl. 4.3 ton pulling capacity winch 12V from model year 2016
Features:
Motor IP67 sealed by groove with sealing ring
Freewheel lever
Cross braces made of stainless steel
Reinforced cable drum
Powder-coated aluminum die-cast housing motor/transmission
Internal drum brake with 3 brake shoes
Removable control unit (so the control can be mounted in any position)
Reinforced, powder-coated contactor housing made of deep-drawn sheet metal
Scope of delivery:
Installation kit
Winch
Aluminum fairlead
Mounting bolts
Synthetic rope with hook
Snatch block with hook
Wired remote control
Wireless remote control
Operating manual
In stock
This 1358 mm (L) x 1255 mm (W) Slimline II Roof Rack Kit includes the Slimline II platform incl. wind deflector as well as a vehicle-specific foot rail, with which you can mount the Slimline II platform on your Mercedes-Benz X-Class. Drilling is required for installation.
In stock
This 1345 mm x 1560 mm Slimline II roof rack kit for your Mercedes-Benz X-Class with original styling bar includes the Slimline II platform and 4 universal bed mounting feet, which let you mount the Slimline II platform on the Mercedes-Benz X-Class equipped from the factory with bed mounting rails, with no drilling or other modifications required.
In stock
This 1475 mm x 1560 Slimline II bed rack kit was designed for your Mercedes-Benz X-Class (2017 - present) with factory bed mounting rails. The kit includes the Slimline II platform as well as 4 universal bed mounting feet, which let you mount the Slimline II platform on the Mercedes-Benz X-Class equipped from the factory with bed mounting rails.
Mounting hardware for 2 pcs Koni/Trekfinder Raid dampers 90-5375SP1 + 90-5471 bottom, from model year 2002, fits Land Rover Defender 90/110/130 (to 2016). Provides a precise-fit addition to or lift of the suspension.
In stock
This 1560 mm (L) x 1255 mm (W) Slimline II roof rack kit includes the Slimline II platform,a wind deflector, 1 pairs of rails and 3 mounting feet (pair), with which you can install the platform on your Nissan NV200. Drilling is required for installation.
Out of stock
This 2166 mm (L) x 1345 mm (W) Slimline II Roof Rack Kit includes the Slimline II platform, a wind deflector as well as 1 foot rail (pair), with which you can mount the platform on your Nissan Patrol / Armada Y62 (2010 - Present). The system mounts easily to the vehicle's existing factory mounting points. On some vehicles, drilling into the plastic gutter trim may be required.
In stock
D-Max, `12->
In stock
Hilux `05 ->
In stock
shackle, Isuzu D-Max `05/12 ->
Out of stock
shackle, Toyota Tacoma from `05
In stock
Mitsubishi L200 from `15 original and OME
In stock
for spring shackle 3-426 (OMEGS20)
Out of stock
95-, all Classic and Sport
Out of stock
In stock
Mazda BT50 `12-`20, greasable
In stock
In stock
02 with manual transmission
In stock
In stock
6-way height-adjustable VA
In stock
In stock
left, HD, 72mm
In stock
In stock
right, HD, 72mm
Out of stock
In stock
Front axle, reinforced
In stock
F350 `05-, Front Axle
Out of stock
OME Nitrocharger+ Jeep Grand Cherokee WK 16- VA left, 58mm by Old Man Emu, fits Jeep. Offers noticeably better vehicle control off-road and on the road, tuned to lift and load.
Out of stock
OME Nitrocharger+ Jeep Grand Cherokee WK 16- VA right, 58mm by Old Man Emu, fits Jeep. Offers noticeably better vehicle control off-road and on the road, tuned to lift and load.
Out of stock
VA, 50mm, 3-way height-adjustable
Out of stock
HA, XHD, 58mm
In stock
OME Nitrocharger+ Toyota LC J7 `99- VA, 58mm by Old Man Emu, fits Toyota Land Cruiser J7. Offers noticeably better vehicle control off-road and on the road, tuned to lift and load.
In stock
Ford Ranger '12
In stock
REVO/VIGO, D-Max from `12, Wrangler YJ
In stock
axle, all Rover from `86
In stock
OME SPORT SHOCK Toy. J74/71 from 99 rear + Hilux ´97-´04 rear left by Old Man Emu, fits Toyota. Provides practical added value off-road and when traveling.
In stock
OME SPORT SHOCK, shock absorber Isuzu D-Max `05/12->, rear, Standard by Old Man Emu, fits Isuzu D-MAX 2012 - 2019 (type ATF). Offers noticeably better vehicle control off-road and on the road, tuned to lift and load.
In stock
Mitsubishi L200, from 2006
In stock
Toyota Hilux, from 2005, J120, J150
Out of stock
Ford F350 `05-
In stock
Leaf spring for the rear axle with a continuous payload of 0-200kg
In stock
Out of stock
In stock
In stock
In stock
L200 `06-
In stock
L200 `06-
In stock
L200 `06, front
In stock
& Pajero V60/80 front, HD
In stock
Nissan GR Y61 3.0l 5-door
Out of stock
In stock
In stock
Rear axle
In stock
In stock
In stock
Out of stock
In stock
rear, XHD
In stock
front, only for turbo diesel
Out of stock
Patrol GR from 02/01, only 3.0 l
Skidplate for engine & transmission
Material: Aluminum 5 mm
Vehicle: Volvo V 90 CC
Type: P
Engines: 2.0D
Model years: 2017 -
Your vehicle data differs or you are unsure whether this is the right choice?
Just give us a call: +49 (0)6154 6321-0
Manufacturer: SGS 4x4 GmbH
Google rating: 
We stock over 2,000 Skidplates for you in our warehouse in 64372 Ober-Ramstadt, Germany.
Items 1 - 100 of 1648